Interaction between a screw dislocation and an elastic elliptical inhomogeneity with interfacial cracks

The elastic interaction between a screw dislocation and an elliptical inhomogeneity with interfacial cracks is studied. The screw dislocation may be located outside or inside the inhomogeneity. An efficient complex variable method for the complex multiply connected region is developed, and the general solutions to the problem are derived. As illustrative examples, solutions in explicit series form for complex potentials are presented in the case of one or two interfacial cracks. Image forces on the dislocation are calculated by using the Peach-Koehler formula. The influence of crack geometries and material properties on the image forces is evaluated and discussed. It is shown that the interfacial crack has a significant effect on the equilibrium position of the dislocation near an elliptical-arc interface. The main results indicate, when the length of the crack goes up to a critical value, the presence of the interfacial crack can change the interaction mechanism between a screw dislocation and an elliptical inclusion. The present solutions can include a number of previously known results as special cases.The project supported by the National Natural Science Foundation of China(10272009 and 10472030) and the Natural Science Foundation of Hunan Province(02JJY2014)     

斜交连续梁桥数值分析研究

在分析了矩阵位移法和传递矩阵法的理论基础上，将二者组合而成矩阵混合法。矩阵混合法的实质就是将结构物的一端未知向量通过矩阵的简单乘法传递到另一端，再将已知条件代入求解的过程。在矩阵传递的过程中引入位移法中的前进代入的概念，即将未知向量不断地以新的未知向量替换，可以防止误差的传递和积累。将矩阵混合法运用于斜交连续梁桥内力计算，完成了矩阵混合法在斜交连续梁桥内力计算中的理论推导和程序的设计，给出了实际算例并与有限元法进行了比较。     

表面力仪的改进及超薄膜流变特性的实验研究

在对原表面力仪进行较大改进的基础上 ,以 5 0 0 SN基础油和十六烷为研究对象 ,进行了超薄膜流变特性的实验研究 .结果表明 :在超薄膜润滑条件下 ,5 0 0 SN和十六烷均表现出明显的非牛顿剪切响应 ,即剪切稀释现象 ;摩擦力幅值随剪切速度的增大急剧上升到最大值 ,然后下降至某一固定值附近并产生波动 ;剪切挤压下的临界膜厚小于静态挤压的临界膜厚 ,剪切运动对吸附层有序结构产生破坏作用     

DISCUSSION ON TWO PROBLEMS OF THEORETICAL MECHANICS IN COLLEGE MECHANICS COMPETITION1)

针对两道力学竞赛试题,从欧拉动力学方程出发分别给出了更加简化的固连系选取方法,分别命名为"Serret-Andoyer近似固连系"和"虚固连系",在此基础上对第1届全国青年力学竞赛理论力学试题第9题,拓展讨论了大球同步旋转时,小球的稳 定性条件,结果表明后者的稳定临界转速要求更低,这将更有利于提高旋转结构的稳定性;对第12届全国周培源大学生力学 竞赛第3题,剖析了任一纬度的运动规律,发现当体系初始角动量为零时会出现一种简洁又优美的运动模式。     

A material force method for inelastic fracture mechanics

A material force method is proposed for evaluating the energy release rate and work rate of dissipation for fracture in inelastic materials. The inelastic material response is characterized by an internal variable model with an explicitly defined free energy density and dissipation potential. Expressions for the global material and dissipation forces are obtained from a global balance of energy-momentum that incorporates dissipation from inelastic material behavior. It is shown that in the special case of steady-state growth, the global dissipation force equals the work rate of dissipation, and the global material force and J-integral methods are equivalent. For implementation in finite element computations, an equivalent domain expression of the global material force is developed from the weak form of the energy-momentum balance. The method is applied to model problems of cohesive fracture in a remote K-field for viscoelasticity and elastoplasticity. The viscoelastic problem is used to compare various element discretizations in combination with different schemes for computing strain gradients. For the elastoplastic problem, the effects of cohesive and bulk properties on the plastic dissipation are examined using calculations of the global dissipation force.     

考虑油膜力作用的船舶主推进系统冲击研究

舰船推进轴系是舰船动力装置的重要组成部分,它的稳定性是舰船生命力的基本保证.本文以舰船主推进轴系为研究对象,考虑了非线性油膜力的作用,在推进轴的非线性油膜力模型中,考虑了油膜涡动效应和挤压效应以及多个轴承油膜力的耦合影响,并考虑了轴承结构本身的刚度.文中采用弹性体动力学方法对推进轴建模,考虑了在外冲击作用下转速和轴承油膜力对于转轴冲击响应的影响,考虑横向运动与转动耦合作用,导出以非线性偏微分方程描述的舰船主推进轴的动力学方程,并用经典理论对其进行离散,最后采用龙格-库塔法进行数值仿真.实例分析指出转速对于转轴冲击响应的影响不可忽略.     

电磁轴承低偏置控制方式的实现

介绍了电磁轴承的基本组成，通过对电磁力的力学方程进行分析，提出了低偏置磁通控制的思想，并从功放的角度出发分析了低偏置电流工作的优点。经过仿真及实验，结果表明，这种方法对于减少功耗损失、获得满意的动态响应和高频动态性能方面是行之有效的。     

控制力矩陀螺用磁轴承磁力参数的辨识

提出一种实用的闭环辨识方法—磁中心变位移法,可以对控制力矩陀螺用磁轴承的磁力参数进行辨识。这种方法通过在磁中心处改变转子位移,得出不同位移时的电流值,再用这些值进行最小二乘辨识,得出所求的磁力参数。辨识出的电磁力模型中代入实际数据所得输出值与磁轴承实际输出数据非常吻合,证明了辨识所得磁力参数的准确性,并且用所得到的磁力参数指导磁轴承系统控制器参数的选择,使之更好地对磁轴承进行控制。实验证明,调整后的参数使转子在 30 060 r/mim 时仍能稳定地悬浮在给定位置,验证了所得磁力参数的准确性。     

Interference effects of two and three super-tall buildings under wind action

Most previous investigations on interference effects of tall buildings under wind actions focused on the wind induced interference effects between two buildings,and the interference effects of three or more buildings have seldom been studied so far due to the huge workload involved in experiments and data processing.In this paper,mean and dynamic force/response interference effects and peak wind pressure interference effects of two and three tall buildings,especially the three-building configuration,are investigated through a series of wind tunnel tests on typical tall building models using high frequency force balance technique and wind pressure measurements.Furthermore,the present paper focuses on the effects of parameters,including breadth ratio and height ratio of the buildings and terrain category,on the interference factors and derives relevant regression results for the interference factors.